The 2026 Ram 1500 TPMS recall covers 16,385 trucks whose tire-pressure sensors may fail to detect low pressure or illuminate the warning lamp. Eligibility is VIN-specific, and FCA says dealers will inspect the sensors and replace them when necessary at no charge.
Recall 26V623, which FCA identifies as campaign 51D, is tied to a tire-and-wheel assembly process change. The stated build window is July 1, 2025 through March 17, 2026. That range describes when potentially affected trucks were built; it is not a substitute for checking the VIN, and it does not mean every truck in the group has a confirmed damaged sensor. For shoppers, the 2026 Ram 1500 TPMS recall makes a dated VIN check more useful than an assumption based on registration year.
If you own or are shopping for a 2026 Ram 1500, check the VIN through the official NHTSA or Mopar recall lookup and ask a Ram dealer to confirm that campaign 51D is open or complete. If it is open, arrange the inspection and follow any instructions in the owner notice. The announced remedy is inspection and replacement of tire-pressure sensors as necessary, free of charge.
Do not use the instrument-panel warning as your only tire check while the vehicle’s recall status is unknown. Check tire pressure with a reliable gauge when the tires are cold and compare the result with the vehicle’s tire label and manual. The 2026 Ram 1500 TPMS recall does not remove the need for that separate manual check. If a tire looks damaged, loses pressure, or the truck handles abnormally, stop in a safe place and address the tire directly; a recall lookup cannot diagnose a current puncture.
The 16,385 figure is the recall population, not the number of trucks confirmed to have a broken sensor. FCA’s filing estimates the defect may be present throughout the affected population, which is why the vehicles are included for inspection. The actual condition of an individual truck must be determined through the recall process and physical inspection.
For an owner, the 2026 Ram 1500 TPMS recall is a VIN check and service visit, not a reason to diagnose a sensor by looking at the dashboard alone. The recall name is useful when calling the service desk, but the VIN determines the campaign match.


The National Highway Traffic Safety Administration campaign is 26V623000; FCA’s internal recall number is 51D. The defect description says the tire-pressure monitoring system sensors may fail to detect low tire pressure and/or may fail to illuminate the TPMS warning light as intended. The recall states that this condition does not comply with Federal Motor Vehicle Safety Standard 138, which addresses tire-pressure monitoring systems.
FCA’s recall remedy is for dealers to inspect the tire-pressure sensors and replace them as necessary, without charge. The owner-notification letters were expected to be mailed beginning October 27, 2026. The VINs became searchable on NHTSA.gov on October 6. These dates are milestones in the campaign, not guarantees that every owner has already received a letter or that a particular dealer has the parts in stock.
| Campaign field | Published detail | How to use it |
|---|---|---|
| NHTSA campaign | 26V623000 | Use this number when discussing the recall with a dealer |
| FCA campaign | 51D | Manufacturer campaign identifier |
| Vehicle | Certain 2026 Ram 1500 pickups | Model year alone does not establish eligibility |
| Population | 16,385 vehicles | Potential recall population, not confirmed sensor failures |
| Build window | July 1, 2025–March 17, 2026 | Helpful context; use the VIN lookup for a vehicle decision |
| Remedy | Inspect sensors; replace as necessary, free of charge | Have an authorized dealer document completion |
| VIN lookup | Searchable October 6, 2026 | Check both before purchase and before service appointment |
| Owner letter | Planned to mail October 27, 2026 | A missing letter does not prove the vehicle is unaffected |
The public reporting and recall summaries tie the issue to a change in the tire-and-wheel assembly process. A process change introduced in July 2025 may have damaged the tire-pressure monitoring sensors during assembly. FCA began an internal investigation on March 17, 2026, and stopped using the assembly method described in the reporting. The affected production window reflects the period associated with that process.
That explanation is more specific than saying the truck has a software problem or that all sensors are defective. The recall concerns the ability of the sensor and warning system to report pressure as required. It does not say that a tire is necessarily underinflated at the moment, that the tire itself is damaged, or that the truck’s normal braking system has failed.
The distinction matters because a TPMS alert is an early warning tool, not a pressure gauge. If the sensor fails to report, the driver may not see a warning when pressure drops. Conversely, a warning can be caused by a real pressure change or other system issue; it is not proof that a recall defect is the cause. Record what the display says and ask the service department to diagnose the actual condition.
The campaign lists certain 2026 Ram 1500 trucks produced from July 1, 2025 through March 17, 2026. “Certain” is important. Manufacturers identify vehicles by specific VINs and production records, so neither a model-year label nor a date range alone is sufficient to decide whether a specific truck is included.
If you are buying used or taking delivery from dealer inventory, ask the seller to show a current VIN-specific recall check and the repair order if the recall has already been completed. A vehicle history report may lag a manufacturer’s system or omit a recently completed repair. Confirm the status directly with a Ram dealer or official lookup, and keep the documentation with the purchase records.
If a truck was manufactured inside the reported window but the lookup shows no open recall, do not assume the lookup is broken. The truck may not be in the affected group, or the repair may already be recorded. If the VIN result is unclear, contact a dealer and give the full 17-character VIN. Never post a full VIN publicly if you do not want it associated with your vehicle.
| Situation | Recommended check | What not to infer |
|---|---|---|
| 2026 Ram 1500, unknown build date | Enter VIN in official recall lookup | The model year alone does not mean it is included |
| Build date appears within the stated window | Check the VIN, then ask a dealer if the result is unclear | Date alone does not prove a sensor is damaged |
| Recall appears open | Schedule the dealer inspection and ask about availability | A warning light is not required for eligibility |
| Recall appears completed | Save the repair order and confirm the campaign number | A generic service visit does not prove campaign 51D was completed |
| Buying from a dealer or private seller | Verify VIN status immediately before transaction | A seller’s verbal assurance is not campaign documentation |
Use the official NHTSA recall search or Mopar’s recall page. NHTSA explains that its tools allow a vehicle owner to search for recalls by VIN, and that recently announced recalls may take time to populate as VINs are identified. The status shown is the right starting point for an individual vehicle; a general news article or a list of all 2026 Ram 1500 recalls is not a vehicle-specific result.
Locate the VIN on the driver-side dashboard visible through the windshield, the driver-door label or the vehicle registration documents. Compare the characters carefully, especially letters and numbers that can be confused. If the VIN check returns a result, note the campaign number, remedy status and date. Take a screenshot or print the result for your records.
If the search does not answer your question, call a Ram dealer and ask the service department to check campaign 51D against the VIN. If the dealer says the campaign is open, ask whether an appointment is needed, whether parts are available and how long the inspection is expected to take. Ask the service advisor to include “26V623 / 51D” on the repair order. A parts delay is an operational detail to confirm with the dealer; the public notice does not guarantee local inventory.
The NHTSA recall page explains how to search by VIN and how safety recalls are managed. Mopar also maintains a recall lookup. Use one of those direct sources rather than entering your VIN into an unrelated third-party site unless you have reviewed its privacy terms.
The published remedy is not “replace every sensor automatically.” Dealers are instructed to inspect the sensors and replace them as necessary. The inspection should be documented, including what was checked and whether any component was replaced. Ask which wheels or sensors were inspected, what repair was completed and how the system status was verified after service.
If one or more sensors are replaced, ask whether the technician completed the relearn or initialization procedure required for the truck. Do not perform a relearn based on a generic online instruction unless it matches the exact vehicle and service guidance. Wheel and tire combinations, aftermarket sensors and service equipment can affect the procedure.
The recall notice says repairs are free. If the dealer proposes a charge, ask whether it is for a separate condition—such as tire damage, aftermarket equipment or unrelated maintenance—and request an itemized estimate. A recall repair should not be bundled with optional work without your agreement. Keep copies of the work order, parts record and final recall status.
The announced remedy may not resolve an unrelated tire problem. A puncture, bent wheel, damaged valve stem, bead leak or incorrect pressure still needs separate diagnosis. If a tire loses air, do not wait for a warning light or a recall appointment to address the loss. Follow the vehicle manual and tire maker’s instructions, and do not drive on a visibly damaged or severely underinflated tire.

The recall material does not say to stop driving every potentially affected truck. It does say the TPMS may fail to detect low pressure or activate its warning light, so use direct pressure checks as a practical backup until the vehicle has been checked. Inspect tires for obvious damage and measure pressure with a gauge when cold, following the door-jamb placard for the factory tire fitment. Do not inflate to the maximum pressure printed on a tire sidewall unless the vehicle or tire maker specifically directs it. This is the practical interim response to the 2026 Ram 1500 TPMS recall while owners confirm status and arrange service.
Check all four road tires and the spare if the vehicle is equipped with a monitored spare. Not every vehicle monitors the spare, and the sources reviewed do not establish that all Ram spare configurations use the same sensor arrangement. The owner’s manual and vehicle display behavior are the right references for the specific build.
If you use different wheels or tires, document the size and sensor part numbers and tell the dealer before the appointment. Aftermarket wheels can use a different sensor or require a different programming step. Do not disable a warning or assume that a new sensor is automatically compatible because it fits physically.
For fleet operators, create a VIN list and track inspection completion by truck rather than by department or model year. A spreadsheet should include the VIN, campaign status, appointment date, repair order number and whether the truck returned to service. That reduces the chance that a vehicle changes drivers before the campaign is recorded as complete.
The purpose of a tire-pressure monitoring system is to warn the driver when specified pressure conditions occur. It is not a replacement for measuring tire pressure. The difference is especially important for a recall involving sensor performance: owners should continue to use the manual checks described in the owner’s manual even if the dashboard shows no alert.
Measure pressure with a quality gauge when the tires are cold—before the vehicle has been driven far enough to warm the tires. Use the pressure shown on the vehicle placard for the installed tire size and load conditions. If towing or hauling changes recommended pressure, consult the manual and any tire-specific guidance rather than improvising.
Do not treat a TPMS warning as a precise diagnosis. A warning can indicate low pressure, a sensor issue or another system condition. Conversely, a sensor that does not report properly may leave the display quiet while pressure is low. The simplest owner routine remains: visually inspect the tire, measure cold pressure periodically and act on a pressure loss promptly.
This separation also helps avoid overreacting to a recall headline. The recall is a reason to verify eligibility and arrange the free inspection. It is not evidence that every truck has a flat tire or that every pressure reading is wrong. If the gauge and display disagree, document the measurement and have the system checked.
The 2026 Ram 1500 may have other recall campaigns, and campaign numbers should not be blended. Those defects can involve different systems, affected populations and remedies. This article addresses only NHTSA 26V623 / FCA 51D; use the VIN lookup to check the complete history for an individual truck.
An owner may have more than one open recall on the same vehicle. A VIN lookup can show additional campaigns, and the dealer can check all outstanding work at once. Ask the service advisor to list each campaign separately on the work order so that a completed TPMS sensor check is not mistaken for completion of a camera, lighting or restraint campaign.
The distinction matters for safety and for later sale. A record that says “recall repaired” without identifying the campaign may not clearly establish which component was serviced. Keep the invoice and check the VIN again after the repair if the online status does not update promptly. If it still appears open, contact the dealer with the repair order number.
| Campaign topic | System involved | Why it should stay separate |
|---|---|---|
| 26V623 / 51D | Tire-pressure monitoring sensors | This is the recall discussed here |
| 26V622 / 94D | Side-airbag connector on a very small group | Different safety system and different repair |
| 26V560 / 83D | Rearview-camera image software | Different failure mode and remedy |
| 26V421 / 62D | Headlamp/DRL wiring | Separate exterior-lighting issue and campaign |
These examples are not a complete list of every campaign affecting every Ram 1500. The official lookup is vehicle-specific and current status can change. A general recall page may include campaigns for other model years or other Ram models.
Owners who change wheel or tire size should tell the dealer. The recall concerns TPMS sensors associated with tire-and-wheel assembly, and a different wheel may use a different sensor interface or location. This does not mean an aftermarket wheel caused the factory recall. It means the technician needs accurate information about the current configuration to inspect and verify the system.
An auxiliary lighting installation does not ordinarily change tire pressure sensing, but added accessories can change vehicle loading. When carrying a heavy bumper, rack, tools or trailer tongue load, use the correct tire pressure for the vehicle’s load instructions. Do not adjust pressure to compensate for a warning-light issue; complete the recall and diagnose the tires separately.
If you are outfitting the truck, SAEC’s 12V versus 24V guide and wiring-kit guide cover electrical planning. The Black Pearls 6-inch work light and Clone Pro 7-inch pod are examples of accessory products, not a claim of confirmed Ram fitment. Confirm vehicle compatibility, mounting and wiring with the current instructions before installation.
For maintenance, make sure wheels are installed and torqued according to the Ram service procedure after any tire work. Do not place a jack or lift under an unapproved point. If the TPMS warning appears after a tire rotation or wheel change, report the service history to the dealer; a warning after service can have several causes and does not by itself prove the recall sensor has failed.
1. Find the VIN. Use the 17-character number from the dashboard, door label or registration. 2. Check official sources. Search NHTSA or Mopar for open campaigns; look specifically for 26V623 / 51D. 3. Call a dealer if unclear. Ask the service department to check the VIN and confirm appointment and parts availability. 4. Check tire pressure directly. Use a gauge on cold tires and follow the placard while the recall status is being resolved. 5. Keep proof of completion. Save the repair order and verify the campaign status after service.
Do not wait for a mailed letter if the VIN lookup shows an open campaign. Conversely, do not schedule based only on a broad recall headline; confirm the specific VIN first. If the vehicle is being sold, disclose the open recall and provide the buyer with the campaign status and repair record.
| Owner task | Evidence to keep | Why it helps |
|---|---|---|
| VIN lookup | Screenshot or printed result with date | Records the campaign status at the time of checking |
| Dealer call | Appointment details and campaign identifier | Helps distinguish 51D from other Ram campaigns |
| Tire check | Date, measured cold pressure and any observed damage | Creates a separate record of tire condition |
| Dealer service | Itemized repair order and parts detail | Shows inspection and any sensor replacement |
| Follow-up | Updated recall lookup result | Confirms the campaign is recorded as complete |
No. The announced remedy is to inspect the sensors and replace them as necessary. The 16,385 number is the population covered by the recall, not a statement that every vehicle received a replacement.
Yes. The stated remedy is free inspection and, when necessary, replacement of the tire-pressure sensors. Ask the dealer to separate any unrelated maintenance from the recall work on the invoice.
Check the VIN through NHTSA or Mopar. The owner-letter mailing date does not prove whether a specific VIN is included, and a missing letter is not a reliable way to determine eligibility.
The public campaign summary does not give a blanket stop-driving instruction. Check the exact owner notice and ask a dealer if you have concerns. Until inspected, use a tire gauge and respond promptly to any pressure loss or tire damage.
No. It concerns the monitoring sensors and warning function. Measure the tires directly; a recall population does not establish the pressure condition of each individual tire.
SAEC Lighting Engineering Team, Foshan. Last updated: 2026-11-03. This article covers NHTSA 26V623000 / FCA 51D only. Campaign status is VIN-specific and can change after repairs are reported. Confirm eligibility and current instructions through NHTSA, Mopar or an authorized Ram dealer.